Have you been thinking long and hard about repairing the wear and tear on your home’s exterior paint? Or have you been considering giving your home a brand new look and changing the colour scheme? Well, it is going to take a lot of work, but with the right tools, technique, time, and a bit of effort, your home will surely stand out from the rest of your neighbourhood! In this article, we will share eight practical steps to giving your home a professional exterior paint job:
1. Prepare All the Necessary Materials
Just like any other house job or chore, preparing all materials beforehand will make the process easier. Essentially, it will ensure that you have all the things you need from start to finish so that you can avoid any sudden trips to the store. Of course, the tools and pieces of equipment you need will vary depending on what you want to achieve. But there are some common tools for this type of project. These include the primer, exterior paint, pressure washer, paintbrushes and rollers, painter’s tape, drop cloths and plastic sheeting, ladder, and paint scraper.
2. Smoothen Your Walls
When it comes to smoothening your walls, you’ll need to take out the scraper and pressure washer. Make sure to remove all debris, dirt, and dust from the walls and other surfaces so that the paint will adhere better to it. At this point, it is also good to scrape off the old, loose paint and sand it down.
3. Look for Holes and Cracks
No matter how many coats of paint you will put on your wall, a bit of crack or hole in the wall will ruin it. With some epoxy filler with a putty knife, make sure to go through these damages and cover them up well. Once the epoxy dries up, sand them for a smooth finish. You will also need to caulk the gaps between siding and trim, and around doors and windows.
4. Avoid Getting Messy
You wouldn’t want your paint to go everywhere, right? As such, make sure to cover up your flower boxes, outdoor furniture, doors, windows, and any other surface where you don’t want your paint to stain.
5. Prime If You’re Going Lighter
If you are painting your house with the same colour or a darker colour, priming is no longer necessary. But if you are repainting with a lighter shade, a coat of primer is needed. With the use of a paint sprayer, applying a thin layer of primer to your walls before the actual painting will be easier.
6. Start with the Siding
Use a paintbrush, roller, or paint spray to apply flat or eggshell exterior paint. Then, go from top to bottom, overlapping each stroke. Similarly, make sure to apply at least two coats.
7. End with the Trim
Let the paint on the siding dry first before you remove the painter’s tape, drop cloths, and other covering. This will help you start painting on the trims, as well as the sides of the doors and windows properly.
8. Clean Up
Once you have completed all the previous steps, make sure to clean up your surroundings. Remove and properly dispose of all drop cloths and plastic sheetings, clean any spilled paint, and pack up and store all your tools properly.
Conclusion: A Professional Exterior Paint Job Will Make Your Home Stand Out
Your home needs to feel warm and inviting on the outside, just as much as it is on the inside. However, getting the best results from your exterior paint project is not a one-person task. You have to get experts on board to help you and give your house a look that you have always wanted. If you are looking for professional exterior house painting in Surrey, BC 3D Painting can provide quality residential services. We even offer interior, commercial, and strata painting, and wood staining. For more information, get in touch with us today at 778-883-9692!