When taking on a significant home remodelling project, you must make sure that all bases are covered. You need to ensure that the equipment is accounted for and the things that will be used for actual remodellings, such as paint. However, many people tend to forget some things, such as the intricate processes that should be done during remodelling. Among these processes, painting the walls is one of them.
It can be confusing when you paint your walls, primarily if the remodelling project also covers the floor. It can be a problem because working on the walls and the base often happens simultaneously. As a result, many homeowners and contractors raise the matter of painting the walls before or after refinishing floors.
Do you paint your walls before or after remodelling your floor? It can be pretty tricky to consider, but fret not—we’ll shed light on the matter in this article. Read on below to learn more.
Reworking Floors Before Painting Walls
Pros
- Your wall colour is easier to match with the floor.
- When sanding your floor, the dust won’t damage newly painted walls because you can simply retouch it with paint.
Cons
- The paint will most likely drip on your new floor.
- Drop cloths should cover the entire flooring system so that they won’t get paint drip.
First and foremost, consider the appearance of both walls and floors. Walls are easier to change as opposed to floors. For this reason, you should choose colours that will complement your wall and your flooring system well. Aside from that, it also helps if you only have subfloors, as this allows you to find a suitable wall colour if you remain undecided.
The bad thing about prioritizing your floor is that paint will most likely drop on them. If the paint does drip, it will stain your floor permanently, which can affect its appearance. To prevent this, you will need to place drop cloths to “catch” falling paint. It’s also best to apply drop cloths to an entire floor just to be sure.
Painting Walls Before Reworking Floors
Pros
- Light drops of paint can often be sanded away, effectively removing it.
Cons
- Paint spilled on wood can be more challenging to remove.
- Walls must be protected since dust from sanding floors can stick to them.
Painting the walls first also works and is in some ways the better option. When your paint has completely dried up, you’re essentially saving your flooring from paint drips. Not to mention, the floor is protected even if there are only sublevels installed before the installation of the floor itself.
On a related note, no baseboards also mean you get to paint down to the sublevel of your flooring system. This will be helpful once the actual floor is installed because the edge where the floor and walls meet will give off a seamless appearance.
Which Works Best?
Frankly, there’s no concrete answer as to what method works best. However, what does work best depends on your situation.
To prevent damage, you must protect your floor from dripping paint. Reworking your floor can also be considered permanent. If paint drips down on your floor, clean it off immediately or else, you’ll have to put up with a paint stain on your floor.
Conclusion
All you have to do is to make sure that your walls or floor are protected from each other during remodelling. If you don’t take care of them, it will make things harder for you because you will need to remove paint or dust manually. When it comes to remodelling sessions, it pays to simply do what’s best for your project!
If putting in the work for painting your home is too much, a contractor can help you. If you’re looking for painting contractors, choose BC 3D Painting! We offer services for painting buildings and wood staining. Contact us today to learn more!